Triner-scale TS60KD-1010 Manuel d'utilisateur télécharger pdf (Page 7)

Assembly Guide Triner TS60KD-1010 Platform Scale

6. Place the third ramp into position.

Using a forklift, move the third ramp into position and carefully lower to the ground.

Make sure there is a gap (approximately 1”) between the scale platform and the ramp.

Important Note: Make sure the scale platform does not contact the ramp because this

will cause weighing errors.

A pry bar will be helpful for adjusting the position of the ramp.

FIGURE 6: Place the third ramp into position.

1 2 3 4 5 6 7 8 9 10

Pas de commentaire

Triner-scale TS60KD-1010 Manuel d'utilisateur Page 7